StarTech.com 3.5" to 5.25" Front Bay Mounting Bracket w/ Mounting Screws (BRACKETFDBK)

Worked perfectly. I used it to move two SSDs that were in different locations in the case, one of which was mounted upside down, hence needing a cable twist, Both SSDs fitted perfectly. The power and SATA connections were perfectly accessible. The handle means you are pushing/pulling on the frame, not the SSDs or their cables.Mine are now mounted in a bay for 3 x 3.5" drives. I bought two, and mounted them easily with the case supplied rubber vibration free mount. YES, I know these are SSD's but most 3.5" drives are HDDs. The upshot is that I needed no tools at all to fix the drives.That was so good I purchased a second, allowing for growth!The case also has space for 4 x 3.5" drives - its a big case! All of which are now accessible easily, without tools, and with all the cables running neatly and untwisted.SUCCESS!

Simple. Works. No more to say.

Only have a small case so space in case was tight and needed a 3.5' bay for another piece of hardware. Had a 5.25' bay up top free so decided to use this mounting kit to move the HDD to there. The mounts seem well made and come with mounting screws. Some other reviewers stated that they couldn't get access to the screws to mount the HDD but i didn't experience this, i mounted the mounts in the same orientation as they are shown in the photo and used the top long slot cutouts, which are accessed easily through the large cutout holes on the outside. However if you had to use the holes beneath the slot cutouts for whatever reason i can see that access would be more tricky and so this could be a design flaw in some cases. Once adapters mounted to rails the whole unit easily slid into the 5.25' bay and was then secured with the mounting screws that thread into the tapped holes on the outside if the adapters. Don't over tighten these as you run the risk of stripping the thread as it is only fairly thin metal. Overall a great adapter kit at a great price that has done the job perfectly.

Fits just right ;)

Whenever I need something odd or old fashioned for a PC build, Star Tech are always the company that come to my rescue. Brackets and screws included. Perfect.

It was a bit tricky to mount but once mounted it does the job, very good quality and has all you need included

I read some customers were complaining that the holes were not aligned for the screws, well I guess im lucky with what I got then. It was perfect for my 2 SSD setup to be put in just one 3.5 bay. My only suggestion would be to have an improvement with the manual and which and where to put the different screw sizes. I managed to somehow install them in the right holes by checking back on my previous SSD which was the OCZ that has its own adapter for the 3.5. It would also help to have an arrow as to which way the bay should be facing as I made an error at first on putting it the other way making the holes not meeting together. Furthermore, my computer seem to be unstable when Im using the power splitter provided, I am not sure but when I put everything with the power splitter that was provided is my computer was shutting down and was unstable, so i decided to just use the vacant power cables direct from my PSU and connect it to my SSD's. Apart from those, everything is fine.Very happy with the quality.

This is very inexpensive and you wouldn't expect a lot. And you won't be disappointed.I bought one from another supplier and the screws were different that held the drive in place to the ones that locate into the device. This time they were the same and pretty ineffectual. The metal bent as I was screwing the self-tapping screws into the pre-drilled holes.Just seems to have been cheapened even more recently. So, I'd probably say just make your own and put a couple of quid into a charity box.