SanusVLL61-B2 SimplySafe Mounting Kit for TV 47-80-Inch

Love this wall mount for a flatscreen! No Messing around just straight forward Measure, Drill and fit! All you need is supplied including the high tensile steel bolts for the bracket that fixes to the back of the telly! It even has it's own built-in Spirit level (though I still used my one to double-check!) Very very simple, Make sure the locking Mechanism is unlocked (press Red Button). Now is the time to fit your cables etc, the ones on my TV were going to be very well hidden and impossible to attach after the TV was attached to the Bracket. Remember to fit the magnetic spacers at this point too, if your TV Back isn't metal then there are two metal discs that stick to the TV to facilitate this. Lift Telly Onto the Bracket (you may need 2 to do this, I got my 65" Toshiba on no problem on my own) and measure the centre from fixed points on either side. (Mine was just the centre between 2 walls). The TV will slide a little either way on the bracket to allow perfect centreing. Once you have the centre, Lock the TV in place by pressing the Black part of the Locking mechanism! That's it!!! It's all on video as well if you check it out when buying this amazing bracket! I've seen this particular Bracket at £49.99 elsewhere!!!! Get it now before they're all gone at this price!!

Excellent quality and easy to fix up. This make was recommended for stud walls using special fixings, GripFix I think they were. The TV bracket is a simple straightforward piece of kit for fixing TV on the wall, brilliant will certainly buy in future.

Easy to install and easy to fit your tv to. limited access to the back of the tv but that is the bracket you are buying.

This product is sturdy and easy to install, comes with two big screws and plugs for the wall which is fine but I added another two myself just to be sure as I was hanging a 65 inch TV off it..comes with all the M screws for the TV and in my case 2 x M6 x 20mm was required and after fitting I got it bang on level first time..Low profile to the wall which I wanted too.. recommended..

Purchased for my heavy 55" smart TV.Excellent quality and very strong. Using just two screws on each part is strong enough to hold tv securely in place.Would highly recommend and might purchase another in a small size for 42" bedroom tv.Have found the smaller one cheaper in local well known DIY shop! So probably purchase from there next time.

What a brilliant and simple Wall Mounting Bracket. I was anxious that it wouldn't hold my new OLED TV but I was wrong! I was also dubious about a bracket that really only utilises the top Vesa mounting points. I was wrong!! The bracket is very easy to fit and hang but only comes with 2 screws and rawl plugs for concrete walls (despite coming with a vast array of Vesa-type bolts). This is a minor issue, but it would have cost pennies for the manufacturer to include more wall fixings.A quick trip to my local DIY centre, where I bought a pack of size 6 x 3 inch screws (the holes in the wall bar are not wide enough for anything larger) and plugs, which was enough to secure the bracket into the blockwork behind my dot-and-dab plasterboard. With six screw holes on the wall fitting I decided spreading the weight and using all six would be my best option.The bottom Vesa mounts are used to fit stoppers. Again, I expected these to be fitted via Vesa bolts to the TV but they're magnetic. The box even comes with stick on magnetic discs, just in case the mounts don't attach to your TV. They are secure enough but I'd really have preferred rubber stoppers which screwed to the TV with Vesa bolts. Still, again, it worked fine on my set!The kit comes with a metal rod, designed to reach the lock button but, in my case and where the vesa holes are not near the top of the TV, this will not be long enough and some improvisation will be needed.I also bought a second, smaller bracket, to anchor a slightly smaller TV in a different room (soon to be refurbed) and am very glad I opted for this bracket, despite the two or three minor issues I encountered.

Damaged my tv as the screws are so bad that they broke as they were screwed in damaging my tv

The one supplied the locking feature doesn’t with. You press it just springs back up. Also this feature houses the levelling bubble … this housing moves …rendering function of levelling button useless because you don’t know where true level is relative to the bracketI was fitting 32mm Samsung. Which takes m4 thread …. They supply 12mm….. doesn’t take and 35takes but with 10mm excessSo have the bracket flush to the tv you have to have you’re own selection of m4 threads … or cut them downYou can pack off the bracket using but the plastic spacer (note singular). Is too long … so the angle of the tv is way too obtuseWhy not supply a number of packers and a more varied set of threadsIn the end I got there by cutting down the packers …. But the truth is that’s a bodgeIt’s a reasonable amount of money for what it is so I expect all eventualities consideredI wouldn’t buy again