MetraElectronics 82-8148 6" to 6-3/4" Speaker Adapter for Select Toyota/Lexus/Scion 1998-Up Vehicles, Black

Perfect fit for my 6.5" Kicker DSC650 speakers. The ring mounts matched perfectly with the factory holes on my 2023 Rav-4 which made the installation hassle free. Also added the NVX XBAF65 2 Piece 6.5" Weatherproof Silicone Rubber Speaker Baffle Kit. Speaker mounted perfectly and the mounting ring keeps everything secure. Strongly recommend mounting the ring screws with Loctite or nylon lock nuts to prevent the ring from vibrating loose.

2005 Toyota Matrix. For front speakers just no adjustments were made. For the rear, they didn't line up exactly but after loosely placing bolts in I was able to get the three bolts in. The lower end protruded just a bit and another was just on the line of a plastic door fastener hole. The door panels may have gone down as us but I didn't want to chance it so shaved them down just a bit with my dremal tool before. No issues and panels buttoned down perfectly.

These brackets fit the rear door of 2017 Highlander with the 6-3/4" Kicker speakers. They align perefect with the factory holes with no modification. If your installing speakers in your vehicle; brackets are a must buy item, because they push the speaker out far enough, so you can roll your windows down.

I used this product to upgrade my door speakers in my 2012 Toyota Corolla LE with JBL’s Infinity speakers. They worked great and my car sounds amazing. It was fairly easy to install, however the nuts that came with the bolts didn’t fit, which was really weird so be prepared to have separate screws if necessary. I don’t know if mine was just a fluke, but it would have been quite annoying if I hadn’t had my own replacements available. Other than that strange mishap, they worked great!

fit 2025 tacoma. had to cut the center pieces out since i got 6.75 in , which i think is the intent? I used a multi-tool to cut the holes out. fit like a glove after that.for that year of tacoma, this is only fro the rear. you need a different adapter for the front doors.

Replaced the factory door speakers in my 2010 corolla and needed this adapter. Speakers themselves lined up very well the adapter but the hole alignment to the door had one of the holes off a bit and needed to drill the hole bigger to allow the screw to line up properly. This happened for both doors so appears to be related to the design measurements. Not a big issue for me but you should be aware that that a small tweak may be necessary to the bracket as it is shipped.

They worked great on my Toyota Corolla 2017 LE speaker setup.

As advertised