See more ","brand":{"@type":"Brand","name":"amtech"},"aggregateRating":{"@type":"AggregateRating","ratingValue":"4.0"},"review":[{"@type":"Review","author":{"@type":"Person","name":"S***E"},"reviewBody":"Cheap and cheerful. Not precision, However does the job well enough, and for drill attachment like this you are always going to find it difficult to use accurately.Does the and quite robustly considering price (Makes sure you oil) in fact very well so worth getting, would get again//RECOMMENDED.","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"G***E"},"reviewBody":"You get what you pay for. The quality is not great. There is play in the chuck shaft bearing and it doesn't rotate concentrically. However it does drill at right angles. I removed the chuck to see if it at least rotated concentrically and it doesn't. It is cheap and not well made but it for works DIY.","reviewRating":{"@type":"Rating","ratingValue":"3.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"O***N"},"reviewBody":"sturdy, sounds abit rattely, ideal for tight spaces, only used it once, brilliant choice for diy.","reviewRating":{"@type":"Rating","ratingValue":"4.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"B***Y"},"reviewBody":"For the price I wasn't expecting the robustness of the tool. Easy to use. Makes those awkward jobs easy and impossible jobs possible.","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"A***R"},"reviewBody":"Great right angle drill adapter. Obviously only plastic housing but perfectly adequate for the DIYr. It's been so useful drilling holes in floor beams where you can't get a drill in level.","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"K***N"},"reviewBody":"It arrived speedily. It broke the first time it was used. Not robust enough to drill cable holes in floor joists.","reviewRating":{"@type":"Rating","ratingValue":"1.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"M***E"},"reviewBody":"Not too comfortable to use. Consider the use case.This helps when you can't hold the drill normally due to the room you have to work. So with that in mind it also makes it awkward to hold it in such a way to get much leverage on the little black handle.However it makes a job that could be hard to do, slightly less hard to do. It doesn't turn it into an easy job, just easier.","reviewRating":{"@type":"Rating","ratingValue":"4.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"C***N"},"reviewBody":"Great for those tight places. Feels cheap but does the job.","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}}]},{"@type":"Product","name":"Proxxon 28512 Drilling and Milling Machine MicroMOT 60 / EF [Energy Class A]","url":"/product/48873217","image":"https://m.media-amazon.com/images/I/513qJQiMU6S.jpg","offers":{"@type":"Offer","price":30800,"priceCurrency":"AED","availability":"https://schema.org/InStock","hasMerchantReturnPolicy":{"@type":"MerchantReturnPolicy","returnPolicyCountry":"ae","applicableCountry":["ae"],"returnPolicyCategory":"https://schema.org/MerchantReturnFiniteReturnWindow","merchantReturnDays":14,"returnMethod":"https://schema.org/ReturnByMail","returnFees":"https://schema.org/FreeReturn","refundType":"https://schema.org/StoreCreditRefund"}},"description":"\n
Perfect for milling, drilling, routing, polishing, cutting, cleaning, brushing, deburring, sawing, engraving, carving, etc. These lightweight high precision tool in a pen style design (diameter only 35mm (1.4\")) is ergonomically formed to allow comfortable handling and optimal control. His quietness and effortless, vibration-free drive via the special permanent magnet motor, the ground spindle and collar bearing all contribute to the ergonomic design. An efficient cooling system facilitates extended use under various load conditions. Useable on any workable material e.g. steel, precious metals, wood, glass, ceramics, plastics, precious stones. Ideal for model builders, woodcarvers, jewelers, opticians, artists, dental technicians, tool and die makers, etc. Note: A mains adapter is required to operate the MICROMOT 60 devices. We recommend the PROXXON mains adapter NG 2/S. The speed control of our 12 volt devices only works when operated via nonstabilised power supply units (e.g. all MICROMOT mains adapters). Connection to stabilised power supply units is possible. However, the devices will then operate with maximum rotational speeds (also applies to operation with batteries). Technical data: Speeds from 5,000 - 20,000rpm (no load), weight: 230g (1.2 lbs), length: 220mm (8 21/32\"). Low voltage for optimal safety, 12V DC, max 40W input
","brand":{"@type":"Brand","name":"proxxon"},"aggregateRating":{"@type":"AggregateRating","ratingValue":"4.6"},"review":[{"@type":"Review","author":{"@type":"Person","name":"T***Y"},"reviewBody":"Comfortable to grip and use for extended periods - tested it on wood carving, rock cutting/engraving and glass etching - found it to be very controllable and easy to use. It's also quieter than I was expecting - which is another plus. Does require the Proxxon Power Transformer which must be purchased separately - would also recommend purchasing the Proxxon Footswitch as it makes operating it a lot safer.","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"M***7"},"reviewBody":"Really impressed by this have had a cheap rotary tool for a few years and the collets kept breaking, love the keyless chuck so no more broken collets and can fit all my attachments from 2.3mm to 1/8th of inch up to 5mm drill bitVery impressed","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"M***N"},"reviewBody":"Very good German produced a small and useful rotary tool , excellent using it with wooden ship modelling.","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"G***Y"},"reviewBody":"Perfect for all my crafting needs. Drilling, grinding and polishing","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"B***R"},"reviewBody":"Yep, see review's header!","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"A***N"},"reviewBody":"Good tool and works well","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"A***R"},"reviewBody":"I first put an order for the drill with the seller CW Tyzack because they showed on Amazon they had stock on the 19th May. The delivery dates given were the 24th/25th May. A bit long but I can wait. I received an email on the 22nd to say the drill had been dispatched. But no tracking details were given.On the 26th May nothing had turned up and the Amazon message I got was \"we are running late but its on its way.\" So I messaged the seller asking if they have dispatched the drill as I haven't received anything? Explaining that I need it for a job. This is the reply I got. \"Hi sorry for the delay,The proxxon has just arrived and is booked in out system, then we will dispatch asap\" I thanked them for their reply and asked when will I receive the drill and the answer I got was next week.I waited then on the 1st June I message the seller again asking. \"It's the 1st now and still not received the drill. Can you tell me when it was sent and with who?\" On 2nd June I received this reply. \"hi, still waiting for this to come in, should be anyday. or you ok to hang on or i can refund and let you know once in. regards\" With this I decided to give up with this seller and asked for a refund. All the way though this saga they were still showing they had stock!I did a web search and found a tool-shop in Swindon that said they had the drill in stock. I rang them up to confirm they had stock and I got the drill the following day plus it was £3 cheaper even with the fast delivery. Excellent service.As for the Proxxon drill. That gets 5 stars. It is an excellent piece of kit. I already have their 12v transformer with speed control and with the speed control on the drill as well. It allows you to sand, cut and drill even plastic without melting it. I am slowing moving from Dremel to Proxxon.","reviewRating":{"@type":"Rating","ratingValue":"1.0","bestRating":5}},{"@type":"Review","author":{"@type":"Person","name":"D***D"},"reviewBody":"Awesome price highly recommend great drill for plastic modelling","reviewRating":{"@type":"Rating","ratingValue":"5.0","bestRating":5}}]}]}}
![Proxxon 28512 Drilling and Milling Machine MicroMOT 60 / EF [Energy Class A]](https://m.media-amazon.com/images/I/513qJQiMU6S.jpg)
